Dji Phantom 2 FPV HUB Kit Manual do Utilizador descarregar pdf (Página 3)

module, connect it to the FPV HUB via HUB-VTX cable according to

pins description of the HUB-VTX cable.

GND

GND wire from PHANTOM 2, connect it to the GND port of wireless

video transmission module.

VCC

Power wire from PHANTOM 2 provides 1.5A@12V power. Connect it

to the VCC port of wireless video transmission module.

VIDEO_GND

GND wire of analog video signal, connect it to the VIDEO_GND port

of wireless video transmission module. If the video transmission

module used has only one GND port on the transmitter, it’s alright to

connect both GND and VIDEO_GND to the only GND port.

VIDEO

For analog video output, connect it to the video input port of the

wireless video transmission module.

Collocation 2&3: iOSD mini/iOSD MARK II and video transmission

module connected

To the CAN-

BUS Connector

of PHANTOM 2

HUB-iOSD mini cable

Micro switch stops at

OSD

Connecting with the

8-Pin cable reserved

in PHANTOM 2

HUB-ZEN cable

HUB-AVL58 cable

A V L 5 8

T R A N S M I T T E R

HUB-iOSD Mark II cable

To the CAN-BUS

Connector of PHANTOM 2

HUB-VTX cable

DJI unspecified wireless video

transmission module

1) It’s alternative to use iOSD mini or iOSD Mark II.

2) Stop the Micro switch at OSD position when iOSD is connected to

1 2 3 4 5

Sem comentários

Dji Phantom 2 FPV HUB Kit Manual do Utilizador Página 3